| Copyright 2009, 2010,2011 Bell Type. All rights reserved. Bell Type 1128 east eleventh street, los angeles, ca 90021 harley@belltype.com 213-485-1609 |
| Originally the Kingsley Machine was the exclusive hot stamping machine recommended by GSA for imprinting leather name tags for the military. This equipment has been discontinued. Please see below for an excellent replacement and an even better machine. |
| Kingsley Machine |
| BELL TYPE & RULE COMPANY Type Foundry & Commercial Printing |
| Military Leather Name Tag Printing Equipment and Supplies Hot Foil Stamping Equipment for imprinting MILITARY LEATHER NAME TAGS |
| The New Hot Foil Stamping Machine for imprinting MILITARY LEATHER NAME TAGS Replaces the Kingsley M-50, M65, M-75, M-101 |
| This are the Type and Dies you will use to imprint MILITARY LEATHER NAME TAG |
| The standard type used when imprinting the Leather Name Tags show here You can find your GSA required type face on this list. |
| How to Order Kingsley Machine is replaced with part number: HM-150 Gauge Bar and Cushion Boards P/N: GB-150 (used to align Name Tag in machine) News Gothic Condensed Type Set of Alpha Characters, CAPS with Numbers P/N: TXG1818GC News Gothic Capital Alpha Characters, CAPS with Numbers and Puncuation these are special deep etched letters (used most for this type of work) old P/N: TXG1818LST and NST New part number for Complete CAP set TXG1818NG Spacer set P/N: TX1890 Typeholder for 1 to 3 lines, with dividers in place for ease of use, P/N CHM-318 (recomended for names) Typeholder also available 1 1/2 x 3 1/2 P/N TS-150 (recomended for printing emblems) Typeholder for 1 or 2 lines of type. (replaces the TH-183 and THSR-2193) P/N CHM-318 Gold Foil 3" wide x 40' long P/N: 912 x 30 x 040 Replaced with P/N: 18LM-4 (now 4" wide) Silver Foil 3" wide x 40' long P/N: 101130 x 040 Replaced with P/N: 19Q-4 (now 4" wide) Storage box for Type Pieces P/N: TB7 (or new P/N: TT-1) Storage Tray for Spacers P/N:SP1 (or new P/N: TT-3) |
| Please email or call us to discuss your requirements. Contact us |
| CHM-318 Is a 3 line, 18 point, typeholder. It is designed to set type for the lines that are imprinted below the military emblems. |
| TS-150 Box typeholder 1 1/2 x 3 1/2 Capacity Mix Type & Dies in same holder |
| Gauge Bar A must for: Imprinting Leather Name Tags This allows you to set up a back and left side stop, use to align leather in machine during printing. Fully adjustable side guide Converts to left or right hand |
| HM-150 |
| Alpha Characters CAPS with Numbers and Punctuation Type - Letters |
| Part No.: TXG1818NG |
| Part No.: TXG1818GC |
| 18 News Gothic CAPS with Numbers and Poings Deep etched type This Type is used most commonalty for Name Patches |
| 18 News Gothic Condensed CAPS with Numbers and Points |
